United Arab Emirates Product Range

Sand blasting machine is used for the blasting operations so, that any dust or contaminants from the metal surface can be removed easily. It is used in many industries for surface preparation.

The Copper Slag can be an abrasive blasting grit composed of granulated Slag made out of metal smelting procedures. The Slag made available from this process is deemed well suited for blast cleaning of metal and stone/concrete surfaces and removing mill scale, rust, old paint, grime, etc.

Glass beads mostly used in the abrasive blast cabinet. they are round in shape and smoothly cleans metal part with a smooth polish. pressure on which glass beads are blasted is 60-90 PSI to get highest productivity result.

Metalizing wire is used in thermal spray gun to provide protecting coating layer on the substrate. Coating is provided to increase the life of substrate use in different applications and provide protection from rust, oxidation to the substrate used in sea and open environment areas.

Metallizing is the process of applying a variety of protective coatings, such as aluminum, zinc, or a mixture of both, to metal surfaces for corrosion resistance. Zinc wire using smooth and clean coating includes great electrical conductivity and higher longevity. It truly is broadly used for design, woven wire mesh, handicraft, street weapon, packaging, along with also other civic uses.

Zinc spray gun, or metalizing gun, is accomplished by feeding zinc in either wire or powder form into a heated gun, where it's melted and sprayed onto the part using combustion gases or auxiliary compressed gas to accommodate the specified velocity.

In an arc spray gun, a motor is employed to push and pull the coating wire. This motor is connected to the control panel and drives with electricity. This motor coordinating the wire of feedstock. In it, wire feed is smooth and allows wire up to 15 meters easily. This electric drive arc spray gun is added for precision and automation.

The flame spray gun is thermal spraying, a group of layer processes during which finely divided metallic or nonmetallic materials are deposited during a molten condition to make a coating. The layer material could also be within the sort of powder, ceramic rod, wire, or molten materials.

The thermal spray gun is used for coating purposes in this technology thickness of 22 microns to several mm thick coating is sprinkle and it depends on feedstock.

Grit Blasting is a surface-smoothing method using abrasive high-speed steel material. The process of the grit blasting machine aims to ensure that surfaces are cleaned and prepared for secondary completion procedures.

The Shot Blasting Machine uses a method call propelling abrasive media with the help of a radial wheel to remove the damage or contaminants from the surface of metal and steel. The Shot Blasting Machine basically cleans and remove the loose scales from the surface of metal and steel.with the help of this machine we can also clean the rough surface edges of automobile parts that have uneven or sharp surface

Portable Sand Blasting Machine continues a machine that is movable from one place to a different easily. A sandblaster is an operation of forcibly propelling a stream of an abrasive shot against a surface under high to smooth a rough surface, roughen a smooth surface or remove the surface materials.