Arc Spray Gun in Bangladesh

Arc spray gun may be a coating process in which where two consumable metal wires are fed independently into the spray gun. Certain wires are then charged and an arc is produced between them. The heat of this arc melts the incoming wire, which is then entrained in an air jet of the gun. This entrained molten feedstock is when dropped on a substrate with the assistance of compressed air. In an arc spray gun price, the load of coating which will be transferred per unit of your time may be a function of the electric power (amperage) of the method and therefore the frequency and freezing point of the wire. The wires usually made from electrically-conductive materials, like Aluminum wire, Zinc, stainless steel, and Copper.

Arc Spray Gun Prices in Bangladesh

The advantages of the Arc spray gun process are that the coatings are available for nearly instant use with no drying times and therefore the no risk of damaging the component. We are leading manufacturers of Arc Spray Gun in Bangladesh. We manufactures the best Arc Spray systems in Bangladesh. We can commonly manually operated, semi-automated, or fully automate the method if required.

In this type of gun, there is no moving drive in the gun. The deficiency of affecting drive complements practically reduces support costs & downtime. There are no impressive parts within the twin arc spray gun price, but no air cap or front wire design changes are required, giving repeatable high-quality coatings year after year. The arc gun delivers optimal airflow & atomization by a variation of air caps that are designed to supply the proper spray pattern for components. From the high-velocity air plug highlighting converging/ diverging air chamber geometry to the flame spray air seal, which provides the best spray design.

Arc Spray Gun Specifications

Applications of Arc Spray Gun Manufacturer in Bangladesh

• Production segments that show explicit surface attributes. 
• Utilize less costly substrate materials for parts, yet keep up superior surface properties. 
• Improve segment administration life. 
• Fix existing parts to like-new or better than new condition. 
• Rescue mismachined segments. 
• Give a superior bond coat in a covering system.

Advantages of Arc Spray Gun

• This cycle's low cost is due to the basic hardware design, easy wiring, and low cost of electricity. The capital and upgrade expenses of a conventional wire-arc spraying gun are many times higher than those of a typical plasma spraying system.
• The use of non-combustible gases and the risk of using dry-air as the atomizing gas made the cycle safer and more cost-effective.
• The atomizing gas has a low temperature after the gas warming zone, slowing the heat transfer to the substrate.

Manufacturers of Arc Spray Gun in Bangladesh 

We are the leading Arc Spray Gun Manufacturer of arc spray gun in Bangladesh. We are also a provider and exporter of arc spray systems, zinc spray guns, and twin wire arc spray guns, all of which are available at competitive prices. Following the creation of a rough surface, the employment of a thermal spray gun should be employed in order for the automized spray metal to form a good grip on the metal, resulting in an increase in the metal's life.

Checkout all our products here. 

We are the leading manufacturers of Arc Spray Gun in Bangladesh.  And we provide the best quality products at the most affordable prices in Bangladesh. 

• Delivery Time- Minimum Time
• Port Of Dispatch- Thar Dry Port
• Production Capacity- 2-3 Per Month
• Packaging Details- Box
• Payment Terms- L/C (Letter of Credit)/T/T (Bank Transfer)